Ask Experts Questions for FREE Help !
Ask
    mck66's Avatar
    mck66 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 1, 2009, 10:19 AM
    Kenmore elite washer #ms 9710802-a
    I was given a kenmore elite washer and it leaks when going into the first rinse/spin cycle.
    During the spin cycle, there are several drops of water on the back of washer. Could the pump be going out or could something be loose?
    Thanks for any help!
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Feb 1, 2009, 07:15 PM
    Check the drain hose to see if it is loose or has a small hole in it.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Model # of Kenmore Elite Catalysts Washer set to Kenmore 110.60936990 dryer from 1999 [ 3 Answers ]

I am experiencing weird problems with my top of the line Kenmore Elite Catalysts washing machine. I bought the washer and dryer as a pair for about $1700 in 1999. The dryer model # is 110.60936990 but the sticker has worn off the washer so I do not know the model #. I think it could be...

Kenmore elite washer [ 1 Answers ]

There's a ld and ob error on my washer, and water is leaking on the top back part, and through the plastic just beneath the tub,it is not draining on the proper place and water also coming out on the hot tube... what does that means and what will I do

Kenmore elite washer [ 3 Answers ]

How do you attach the tub and the boot?

Kenmore Elite Washer [ 1 Answers ]

My washer is adding water during the entire spin cycle, earlier in the day it was stopping in the middle of a cycle, and shutting down?:(

View more questions Search