Ask Experts Questions for FREE Help !
Ask
    dreamosh's Avatar
    dreamosh Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 7, 2007, 06:19 AM
    Kenmore elite washer
    How do you attach the tub and the boot?
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Oct 7, 2007, 06:28 AM
    By boot, are you referring to the centerpost seal? If so, squeeze and push through the outside of the bottom of the tub toward the inside. Then make sure all springs are good. If not they must be replace as a set (4)
    dreamosh's Avatar
    dreamosh Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Oct 7, 2007, 10:25 AM
    It seems like the whole top of the drum came unattached as well do I have to to take the back off to get to the springs?
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #4

    Oct 7, 2007, 11:35 AM
    Ou have 3 suspension springs and 1 counterweight spring. If the tub seems to pull up check the drive block and spanner nut
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Model # of Kenmore Elite Catalysts Washer set to Kenmore 110.60936990 dryer from 1999 [ 3 Answers ]

I am experiencing weird problems with my top of the line Kenmore Elite Catalysts washing machine. I bought the washer and dryer as a pair for about $1700 in 1999. The dryer model # is 110.60936990 but the sticker has worn off the washer so I do not know the model #. I think it could be...

Kenmore elite washer [ 1 Answers ]

When I operate the kenmore elite washer, after about 5minutes' working it give massage 'Ld' and stop. What is 'Ld' meaning? The cloth have got some dirt after it stops.

What does the Ob mean on a Kenmore Elite Washer [ 1 Answers ]

My Kenmore Elite Catalyst washer keeps giving me the Ob error when it is running. What does that mean?

Kenmore Elite Washer [ 1 Answers ]

My washer is adding water during the entire spin cycle, earlier in the day it was stopping in the middle of a cycle, and shutting down?:(

View more questions Search