Ask Experts Questions for FREE Help !
Ask
    emska1's Avatar
    emska1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 31, 2009, 06:12 PM
    Digital meter
    How do you operate a digital meter to find amperage on a hot lead
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Jan 31, 2009, 06:40 PM

    Plug into 10 Amp if under 10 amps and hook across your power switch. It needs to be inline with the load, On/Off switch is a good spot, 1 lead on 1 side, 1 lead on the other, reverse probes to show negative for a draw if you want.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Changing from non digital thermostat to digital [ 1 Answers ]

I have an old non digital Honeywell T87F thermostat, gas burner with baseboard water heat. Can I change to a new digital Honewywell RTH230B and how? Thank you

320 amp meter [ 1 Answers ]

I set 2- 2oo amp main breaker panels in a house and ran 4/0 4 wire to the meter base which is 320 amp meter base the panel upstairs is about 30 ft away from the meter will I need another disconnect at the meter for that panel

Rmp meter is too low [ 1 Answers ]

I currently own a 99 Honda Civic LX and the rmp meter is too low how can I adjust it? I use to have a older car with a carburator and it had the screws that it was easy to adjust but with this car I've looked and I can't find it Thanks

What is the avg. Gas p.s.I. From gas meter on the residentcial side of meter [ 2 Answers ]

What is the avg. gas p.s.I. from gas meter on the residentcial side of meter. I think its 5 lbs. I live in Los Angeles, don't know if it changes from state to state.:eek:

320 Meter Bases [ 1 Answers ]

Is double-lugging permitted on class 320 meter bases, or do they have dual lugs for parallel service conductors?

View more questions Search