 |
|
|
 |
Uber Member
|
|
Jan 31, 2009, 08:03 AM
|
|
Exploding light bulb
The lightbulb in my hallway ceiling fixture stopped working. When I tried to replace it the light bulb came off in my hand but the base is still in the ceiling fixture.
Any way to get the base out without electrocuting myself?
Unfortunately my breaker boxes are not marked and I have no idea which breaker controls this hallway.
Or is my only choice to locate the breaker, whatever that takes?
|
|
 |
New Member
|
|
Jan 31, 2009, 08:32 AM
|
|
The only way to successfully get the bulb base out without getting "zapped" is to make sure that the power is off.
Unfortunately, if you don't know which breaker controls your hallway light, you will have to kill the power to the whole place.
You can do this by shutting off the Main breaker (the big one at the very top of the box marked "Main").
Once you've shut all the power off, you can grab the bulb base with needle nose pliers and unscrew it. You can also try the "potato trick" if you don't have pliers.
Technically you should not have power to the light if the hall light switch is off. THIS IS NOT ALWAYS THE CASE.
Sometimes, things are not wired to code. The light may have power before the switch. In this case, the light will still go off when you shut the light switch off, but you will still get shocked if you touch the light socket.
I hope this helps. :-)
62fender
|
|
 |
Uber Member
|
|
Jan 31, 2009, 09:07 AM
|
|
 Originally Posted by 62fender
The only way to successfully get the bulb base out without getting "zapped" is to make sure that the power is off.
Unfortunately, if you don't know which breaker controls your hallway light, you will have to kill the power to the whole place.
You can do this by shutting off the Main breaker (the big one at the very top of the box marked "Main").
Once you've shut all the power off, you can grab the bulb base with needle nose pliers and unscrew it. You can also try the "potato trick" if you don't have pliers.
Technically you should not have power to the light if the hall light switch is off. THIS IS NOT ALWAYS THE CASE.
Sometimes, things are not wired to code. the light may have power before the switch. In this case, the light will still go off when you shut the light switch off, but you will still get shocked if you touch the light socket.
I hope this helps. :-)
62fender
I have called a friend to come over and shut the power down. He has a concern because I have a whole house generator and isn't quite sure how this changes things but he's going to give me a hand.
Thanks for the info -
|
|
 |
Full Member
|
|
Jan 31, 2009, 09:23 AM
|
|
If the lamp is wired correctly, shutting off the switch will kill the power to the socket. It's still a good idea to shut off power at the circuit panel.
I seriously doubt that shutting off a circuit will affect the whole-house generator at all.
|
|
 |
Uber Member
|
|
Jan 31, 2009, 10:07 AM
|
|
My neighbor shut off the power and the generator went on. So much for that idea and I'm not sure he's not going to blow my house up while attempting to keep me from electrocuting myself.
What's the potato trick?
|
|
 |
New Member
|
|
Jan 31, 2009, 10:24 AM
|
|
Okay, I didn't think to ask if you had a backup generator that comes on automatically.
If you can't shut off electrical panel & generator at the same time (you should be able to), use a circuit tester (test light), while your helper shuts off the breakers one by one.
The potato trick is: skin a potato, and whittle down the end to fit inside the fixture socket.
Press the potato into the bulb base, and unscrew while applying slight pressure.
Only try this if you are sure the power is off!
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Need light bulb
[ 5 Answers ]
Need to fine a light bulb for an outdoor lighting fixture it is a fluorescent spiral bulb with a plug in base - RHINE FSH13EL 2700L/CRI>13W
Refrigerator light bulb
[ 4 Answers ]
Does a refrigerator light bulb have to be a special appliance bulb? After 10 years mine burned out and I tried a regular 60 watt bulb, just to use for a short time, and it doesn't work either. And the little 40 watt ceiling fan bulbs have a different size "base" that goes in to the socket. What's...
Replacing light bulb
[ 7 Answers ]
I have a 9 year old Hampton Bay ceiling fan with light kit. The original light bulb quit working. I attempted to change it but cannot for the life of me figure out how to get te cover off to change it. There are no thumbscrews and no visible catches or clips. I went to the Hampton Bay website but...
Light bulb bases
[ 3 Answers ]
What are all the current light bulb base configurations?
Light bulb
[ 3 Answers ]
Hello
I purchased a Hampton Bay ceiling fan.
Can I use a 75 watt intermediate base light bulb?
View more questions
Search
|