Ask Experts Questions for FREE Help !
Ask
    bamagirl30's Avatar
    bamagirl30 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 25, 2009, 03:55 AM
    Corner gaps in one piece tub surround
    I bought a one piece tub surround from Lowe's. It did not come with anything to put in the corners. When you push the surround into the corners there is still gap at the top. Where can I get corner caps to fill the gap or what is the best way to install?
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #2

    Jan 25, 2009, 07:17 AM
    Hi Bamagirl...


    They do not make caps for this situation! Drove me crazy on a couple I installed.

    You could stuff insulation down inside the space, pack it tight and then fill this area with a couple layers of caulking (mildew resistant)... that should fill this and keep it pretty water tight... ;)

    I have also made my own caps out of plastic material I found and then caulked them tight into the corner.

    Just some ideas for you.

    MARK

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Tub surround-3 piece install [ 4 Answers ]

I purchased a 3 piece tub/shower surround and replaced the walls with green board,patched all the seams and corners with drywall mud,sanded and ready to install 3 piece unit. Installed first wall opposite fixture wall,drew level line all around the top of the rest of the walls.drilled holes for...

Age gaps [ 1 Answers ]

I'm 16 my boyfriend is 19 I live in nc he lives in sc can we get in trouble

How do I remove a one piece bathtub/surround [ 1 Answers ]

How do I remove a one piece bathtub/surround

Trying to find a one piece tub surround to fit a large jet tub [ 1 Answers ]

I recently purchased a home with a large juccuzzi jet tub (measures 73" long, 36" deep, and I can go as high as 78" to my ceiling) . I would like to put in a new tub surround, however, I have talked with rona, home depot, and many renovators in my area and they all are telling me that I can not...

Preparation to install a 5 piece tub surround [ 1 Answers ]

What is the best way to intall a tub surround? The green board is already up and primer. There are no instruction to be found. What preparations do I have to do first? Do I have to use mineral sprits on the backing before I apply the adhesive?


View more questions Search