[pamalasue68]

Inducer fan motor turns on, then you can hear the gas valve trying to kick on, but the igniter never comes on.

[wmproop]

The gas valve should even be trying to click on until the igniter is activated,, is it giving a code, (on the circuit board?)

[pamalasue68]

Not to sound stupid, but I didn't see anything that would give a code on the circuit board(a red light and that is it).

[KC13]

Sounds like a new ignitor is in order. It should be glowing during the ignition trials.

[hvacservicetech_07]

I second that,replace the ignitor.

[pamalasue68]

That's what I was thinking it was but it's my mother-in-laws heater and I didn't want to start replacing a bunch of parts that I didn't need to replace, so thanks.

[wmproop]

not to sound stupid, but i didn't see anything that would give a code on the circuit board(a red light and that is it).

Most will give a blinking code if the igniter is bad,, but yes some don`t

[pamalasue68]

Thank you all, it looks like I will be buying a ignitor tomorrow. Once again, thank you all