 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
It seems that the pilot light on my hot water heater keeps going out overnight or so. Is there a specific reason this is happening? I do have a home warranty but I just want to make sure these guys are on the up&up with me if they tell me I need a new whatever I may need. I guess I'll just have...
My gas hot water heater dial has OFF to the left, PILOT in the middle and ON to the right. If we are going away and want to not have the water heated can we just turn the dial to PILOT and the flame will stay lit but just won't heat the water or does the flame go out completely and then PILOT would...
I have a fireplace insert that is one season old. We turned it off when we thought summer had arrived. Well it got cold again so I turned on the pilot and tried to get some heat. The problem is that the main gas burner will not go on. The pilot is lit and the thermopile for the main gas valve...
My water heater is located in my attic. After Katrina, I had to repair my damaged roof and it seems that the attic fan went out. Since then my water heater pilot light has repeatedly gone out. I can re-light it usually, but the lack of air up in the attic causes the light to go out. Presently,...
I have the same problem as the person who asked about getting their wall heater to light. The answer was to make sure the flame was touching the thermocouple.. . But how do you do that? I can't make the flame higher, so do I move the thermocouple lower and what does a thermocouple look like...
View more questions Search
|
