Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Connect a port on a remote switch to a secure segment on the local switch
[ 4 Answers ]
I have 2 Netvanta 1224R switches. On the main switch I have 3 Vlans setup. Vlan1 = main network (example IP 123.231.5.1) Vlan2 = Web Access (Example IP 69.115.851.202) Vlan3 = Secure segment (Example IP 123.231.8.1) On the remote switch I have 1 Vlan. Vlan1 = Main network (example IP...
I'm having trouble finding the correct brakelight switch for my 2004 explorer
[ 2 Answers ]
I took the old one in to Napa, Auto Zone, Oreilly's, Pep Boys and Advanced Aoto parts. They all showed a different brake light switch for the 2004 Explorer. They check 2003 and 2005 and it was the same one. How does this happen and where can I get the correct one?
HEAT-OFF-COOL system switch - AUTO-ON fan switch
[ 1 Answers ]
From an Email: ''Dear asklabman, I am a first time house ownere & having an issue with my Honeywell T8112 Programmable Thermostat. Thermostat has two switches for the fan - AUTO FAN & FAN ON switches and three switches for thes system, COOL, HEAT & System OFF modes. Yesterday we turned ON...
HEAT-OFF-COOL system switch - AUTO-ON fan switch.
[ 2 Answers ]
Dear Gurus, I am a new house owner & not used to thermostats. We have Honeywell 8112D thermostat. We recently turned ON our Fan switch (in the thermostat). Now the fan is not turning off. It is continuously running even when the system is in OFF & Fan is in AUTO mode. We tried reducing the...
Converting pull switch lights to wall switch
[ 3 Answers ]
I've been struggling finding the answer to this in books and online, it seems as if it should be an easy question and something that gets done all the time. Looking for some help. My basement has several rooms and all lights are wired "hot" with pull switches from each light receptacle. When the... View more questions Search
|