Ask Experts Questions for FREE Help !
Ask
    smartcpa's Avatar
    smartcpa Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 19, 2009, 07:22 PM
    Digital Thermostat Wiring
    I have a GAS hot air heat system with A/C. It is a 2 zone, not multi stage, with a control thermostat on the first floor and slave thermostat on the second floor. The first floor stat has 6 wires, white, red (jumped to RC/RH) brown, orange, yellow, green.

    I believe the old stat to be faulty and want to replace with 2 new ones. The furnace has a Trol-A-Temp MM-2 control pannel and the system has 2 Honeywell ZD dampers.

    This is not a heat pump system. Any suggestions as to what thermostat to use a replacement?
    Thank you
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Jan 19, 2009, 07:56 PM
    Call Honeywell Customer Assistance toll-free at 1-800-468-1502

    The reason for this is the thermostats used in this system are usually specifically designed for the trol-a-temp system in many cases.


    http://customer.honeywell.com/techli...0s/69-1361.pdf

    Thermostat info

    http://customer.honeywell.com/techli...0s/68-0231.pdf

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Changing from non digital thermostat to digital [ 1 Answers ]

I have an old non digital Honeywell T87F thermostat, gas burner with baseboard water heat. Can I change to a new digital Honewywell RTH230B and how? Thank you

Wiring for my digital thermostat [ 2 Answers ]

I have a hunter 44155c hunter thermostat and it hasn't worked right since I've had it I don't think its hooked up right . I have 5 wires , coming out of the brown wire is a red,green and white wire, and coming out of the white is a red and a white wire, I hope this makes since, something isn't...

Replacing Analog Thermostat with Non-Programmable Digital Thermostat [ 1 Answers ]

Replacing Analog thermostat with White, Yellow, Red, & Black wiring with non-programmable digital thermostat Model #RTH3100C. Please help!!

Need help with wiring a Honeywell T8011 Digital Thermostat [ 4 Answers ]

I bought the 'T8011R1006' programmable Digital Thermostat to replace my existing 'T874R1822', Analog Thermostat that controls a 2-Stage Heating and 1-Stage Cooling Electric Heatpump, The Sub-base model of the existing thermostat is 'Q674L1710'. The volts going into the thermostat is 24V. The...


View more questions Search