Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Loss of hot water
[ 1 Answers ]
A little over a week ago we replaced our water tank and replaced the hose that comes from the tank for the hot water. The pressure wasn't as strong as when we had the previous water tank but it worked OK none the less.so we finally had water.Then a few days later we lost pressure with the hot water...
Water pressure loss while on.
[ 17 Answers ]
I am knew to this.. I've replaced the water heart along with the supply lines.. but this time I use the flexible hose lines, instead of the cooper lines.home depot sold them to me. Anyway.. the water pressure is good while one sink or tub is running but as soon as I turn on another sink,or...
New hot water tank installed, loss of water pressure
[ 1 Answers ]
After the installation of a new hot water tank, we have less pressure which is only noticeable when trying to fill the tub. Any ideas? Thank you.
Loss of hot water in shower when hot water is used by sink
[ 2 Answers ]
We are in the process of remodeling our basement bathroom/shower. We have the whole thing gutted and can see where the cold water pipes come into our house. We want to fix the problem we have of when taking a shower, no one can use any hot water because the shower momentarily gets cold. Once the...
Bathtub hot water loss
[ 7 Answers ]
Just finished remodel on additional bathroom. Original bathtub now losses hot water after a few minutes, goes lukewarm. Additional bath uses pex pipe attached to copper and no change made to original bath. TIA View more questions Search
|