Ask Experts Questions for FREE Help !
Ask
    tigers76's Avatar
    tigers76 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 12, 2009, 07:41 PM
    Age of Tempstar SP80
    I own a condo that I am selling. Showed it tonight and the potential buyers asked how old the unit was. It is a Tempstar SP80 but I have crawled all around the unit looking for a plate with a serial or date. Cannot find one. Does anybody know the date range that this model was made so I can at least provide some usefule input to the potential buyer? Thanks for taking the time to respond.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jan 12, 2009, 11:51 PM
    That model number has been used for some time over the years. The only exact way to know would be if you can find the EXACT model and serial number.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heil SP80 Won't Ignite [ 11 Answers ]

Last night when I went to bed the furnace was working fine. The power flickered on and off all night, and at 5 am I woke up freezing my butt off. It was 52 degrees in my house. I can hear it the furnace running, but it is not blowing any heat through the vents in my house, nor is it taking in...

Tempstar A/C [ 4 Answers ]

Any input about the 13 seer Tempstar R410 Heat pump system? I am building a new house and want to make sure it is a good brand.

Heil sp80 gas settings [ 4 Answers ]

Good Day: Our furnace is a Heil SP80 model #NU65100BFB2, 100K BTU output, converted to LP gas. The main gas valve failed (Honeywell SV9500M 2682, converted, dead solenoid) We have just put in a new main gas valve (Honeywell SV9501 M2056), and personally put in the gas conversion from NG to...

Heil sp80 gas settings [ 1 Answers ]

Good Day: Our furnace is a Heil SP80 model #NU65100BFB2, 100K BTU output, converted to LP gas. The main gas valve failed (Honeywell SV9500M 2682, converted, dead solenoid) We have just put in a new main gas valve (Honeywell SV9501 M2056), and personally put in the gas conversion from NG to...

Heil SP80 furnace malfunction - possibly the valve [ 3 Answers ]

The electric igniter does not ignite when the furnace should. The blower works fine, and is the first thing that goes on when the furnace is on for a heat. When I press on the wiring connector that goes into the valve the igniter then gets red hot and then the fire begins. I was wondering if...

View more questions Search