Ask Experts Questions for FREE Help !
Ask
    mulhall's Avatar
    mulhall Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 4, 2009, 08:48 AM
    Some radiators not heating properly
    Have tried to bleed but first radiator doesnot seem to be filling with water
    21boat's Avatar
    21boat Posts: 2,441, Reputation: 212
    Ultra Member
    		  
    #2

    Jan 4, 2009, 08:57 AM

    Have you bled the radiators with the circulater on? If there is an air bubble and no circ it takes some time. AN average boiler is between 8 and 12 lbs of pressure Try The circ on and be patience sometimes it takes time for an automatic feed to refill the boiler if its low in water Start at The top radiator and work your way down to lower radiators.

    Signed 21 boat

    If I have Helped to Answer Your Question Please Rate My Answer
    bass45's Avatar
    bass45 Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Jan 12, 2009, 05:51 PM

    Yes, Radiator is not filling with water.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Radiators not working properly [ 7 Answers ]

I hope someone can please help. We have had problems with our heating system (2 years old) for the past 2 months and have had the people who installed it working to repair it. First the boiler stopped working properly. After a new pump, heat exchanger and circuit board were fitted, the boiler...

My radiators are not heating properly [ 1 Answers ]

Some of my homes radiators are not heating properly, I have tried bleeding them but only dirty water is coming out, how do I resolve this?

Radiators not heating [ 2 Answers ]

I recently converted from oil to gas heat in a 4 zone home-- 2 with baseboard and 2 with cast iron radiators. A new cast iron Burnham boiler was installed to take the place of an old steel boiler. My prolems is with the radiators-- where I have lost heat seven times in one month. Apparently air...

Radiators not working properly. [ 1 Answers ]

Some of my radiators are not working properly. I tried bleediing them a few of them started to warm up but I still do not hear the water coming through them. I wanted to know if there was something else I can do in order to get them working. It's cold here in Pittsburgh, PA

Radiators not heating when bled [ 4 Answers ]

I have a Potterton Kingfisher 2 floor standing boiler. The two radiators in the living room are only partially heating. The radiators make whooshing sounds when turned on and this also happens when being bled. Nothing comes out on one radiator when being bled and the other blows out air then...

View more questions Search