Ask Experts Questions for FREE Help !
Ask
    Clutch1's Avatar
    Clutch1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 17, 2008, 10:26 AM
    Wheel bushings
    Can a motorcycle be riden with the wheel bushings in backwards?
    raging's Avatar
    raging Posts: 6, Reputation: 1
    New Member
    		  
    #2

    Jan 8, 2009, 06:46 AM

    If they are the same on both sides,additionally you can ride a 2 stroke backwards if you remove the reed valve and jump start it going backwards it is really funny to watch people trying to ride in reverse
    saucemansrt's Avatar
    saucemansrt Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jan 11, 2009, 06:26 AM

    Do you mean that the bearings were installed with the numbers facing in?

    If so then it shouldn't be a problem.


    Cheers
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bonding bushings and ground wire raceway [ 7 Answers ]

1. From the meter base, I have a 3" long galvanized nipple (2" wide in diameter) leading to and external main disconnect. The nipple carries 3 2/0 copper wires (2 hots and one neutral) to the disconnect. From the disconnect, I have 2" diameter galvanized conduit running into the house to the...

Control arm bushings on a lexus [ 1 Answers ]

Could someone please tell me how to change the control arm bushings on my 93 lexus es300 I have the bushings and I tried to change them but I couldn't get them to come out. Do I need a special tool or something? Any help would be greatly appreciated.

Cables,AC.MC.FMC, bushings [ 6 Answers ]

Some questions concerning types and differences of armored cable, type AC; metal clad cable, type MC; flexible metal conduit, type FMC, and insulating bushings. First, I finally used all of my Borders gifts cards and bought an NEC code book. :D That being said I still have several questions. I...

Plenum EMT Bushings? [ 3 Answers ]

I'm installing a wireless access point in a commercial environment on a drop ceiling. The space above the drop ceiling is plenum. The data jack for the access point is installed in an electrical box through a ceiling tile supported by a rod snapped onto the ceiling grid. I want to have the data...

Tilt-wheel steering wheel problem [ 1 Answers ]

On my 1998 Buick Park Ave the tilt-wheel will no longer change positions. A couple of days ago I got in the car, adjusted the steering wheel and heard something Pop. Since then, the steering wheel will only stay in that position. Does anyone know how I might go about fixing this problem? ...

View more questions Search