Ask Experts Questions for FREE Help !
Ask
    lilfergy's Avatar
    lilfergy Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 26, 2008, 08:55 PM
    Changing an thermostat from a Jeritol HPT 18-60 to a Hunter 44860
    Changing a thermostat from a Jeritol HPT 18-60 to a Hunter 44860 it will not turn itself to emergency heat all the wires are hooked up
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
     
    #2

    Dec 26, 2008, 08:58 PM

    Its probably junk,, like most of the hunter tstats

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring from old carrier thermostat to Hunter 44860 [ 3 Answers ]

Hi! I need help how to wire properly my new Hunter thermostat model 44680 from an old carrier stat that has wires w/ colors red,blue,yellow,green,& white.I have read some wiring combination from other site but want to be sure the proper wiring?I would appreciate any help!thanks! ntmags

Rheem to Hunter 44860 Thermostat [ 7 Answers ]

Trying to replace an old thermostat with a Hunter 44860 and can't seem to get it to work. The wiring on the old Rheem unit is as follows - B - Blue Wire R - Red Wire G - Green Wire Y - Yellow Wire W2 - White Wire X - Brown Now the new unit has the following... note that it does not have...

Hunter digital thermostat 44860 fan keeps running [ 1 Answers ]

We have electrical heating/air. Have self installed hunter 44860 and programmed. When we return power, the fan will not cut off. We have set it up for "refresh" 15 minutes.

Converting a Carrier Thermostat to a Hunter Model 44860 [ 3 Answers ]

I currently have a basic contractor installed Carrier thermostat (non-programmable). We wanted to upgrade to a programmable. I went with Lux at first and had to call the tech support, only to have them call back and tell me that my system wasn't compatible. Anyway, here is my current make up on...

Changing from a Rudd to a Hunter thermostAT [ 1 Answers ]

I bought a hunter 44360 digital thermostat to replace a Rudd. The Rudd was wired Y-Yellow, G-green, E-White, R- Red, B-Blue, and a brown on X. The Hunter has G, RC, RH, Y/O, W/B and Y1. I can't seem to get the outside fan to run. Also before changing the thermostat, the blower fan constantly...


View more questions Search