Ask Experts Questions for FREE Help !
Ask
    redandwhite773's Avatar
    redandwhite773 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 26, 2008, 08:33 AM
    Hampton bay ceiling fan remote won't work
    My Hampton Bay ceiling fan will not respond to the remote. We lost power to the fan and although the light lights up on the remote, neithe the fan or light will respond. The battery is new, and no one has changed the settings in the remote or the fan. Any help you can give me would be very much appreciated. Thank You!
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Dec 26, 2008, 12:39 PM

    Is it a new fan, or was it previously working and then this problem? What do you mean when you say you lost power?

    Ceiling fan remote controls - help and FAQ- Ceiling Fans N More
    wendyv's Avatar
    wendyv Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Jan 23, 2010, 04:42 PM

    Hi we just bought a new Hampton Bay ceiling fan with a remote and hooked it up exactly as the book said. They said to put it together as far as the blade assembly; then to check to make sure it doesn't wobble before putting in the lower light assembly. It also does have lights in the upper part of it. We checked the pins in the transmitter and also the receiver and they are the same. Turned on the hydro and nothing, deader then a doornail:-(. No lights work and the fan doesn't run.
    The transmitter red lights goes on; so know that it is trying to contact the receiver?
    Anyone have any idea please on how to make it work; or is the receiver a 'dud'?
    Thanks so much for any help, it would sure be appreciated; we are at a loss here!
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #4

    Jan 27, 2010, 01:54 AM

    How did you wire it at the ceiling?

    Have you tried assembling it fully? There may be additional wiring in the bottom part.

    What was there before the fan, how was it wired, what controlled it?

    What is hydro?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My ceiling fan remote will not work, hampton bay Model #UC7083T? [ 11 Answers ]

The Red Light Does Turn On But It Won't Work. I Threw Away The Instructions Please Help!!

Hampton Bay remote ceiling fan [ 2 Answers ]

I am trying to get at the receiver in the upper dome. How do I get at that thing? Do I need to take down the whole unit? Is there and easy step to reset the receiver? Please help!! :confused:

Hampton Bay Ceiling Fan with Remote [ 4 Answers ]

We just replaced an existing ceiling fan with a Hampton Bay ceiling fan with remote. When using the remote, the lights can be turned on and dimmed. The fan speed changes with the brightness of the lights. (If the lights are dimmed the fan is slow - as you increase the light the fan speeds up). We...

Hampton bay remote ceiling fan [ 1 Answers ]

The light on my ceiling fan does not work. I changed the bulb. I also changed the batteries on the remote control to no avail.

Hampton Bay Ceiling Fan w/Remote SWITCH WILL NOT WORK [ 1 Answers ]

I have installed all new ceiling fans in the house. They are all Hampton Bay's with remotes. The one in the kitchen and dinning room work by both the remote and the switch. However, when I installed the ones in the bedrooms, the wall switches will not work. There is a "red" wire up in the...

View more questions Search