Ask Experts Questions for FREE Help !
Ask
    LucyLou1's Avatar
    LucyLou1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 19, 2008, 03:24 PM
    Burner flame engages on glow rod then kicks off


    The glow rod is glowing, the flame engages across flow rod for approximately 3-4 seconds but the other four burners do no light (when I blow air on the flame it pushes the flame to the other burners & the burners stay for for a whole running cycle but will NOT engage for a second cycle. The light indicator code on the box reads: PRESSURE SWITCH STUCK OPEN. (Yes, the small blower is running):(
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #2

    Dec 19, 2008, 04:05 PM

    The burners will likely have to be removed and cleaned to restore flame carry-over during ignition. Pressure switch fault is odd if the unit is attempting to ignite.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Beckett model AFG burner flame-out [ 14 Answers ]

This season is the first time ever that this has happened. The furnace starts, gets a flame, runs for a while, then it flames-out. It sounds like the oil pump is still running (I hear like a spraying sound). Nothing shuts off. Then the flame will come on again, but may continue flaming-out...

Low power to glow bar [ 1 Answers ]

Have a goodman furnace that had a bad board I replaced the board but now there is only 14 volts to the glow bar and there should be 110. Could this be a ground problem or bad wiring

Heater engages itself on and off on and off etc. [ 1 Answers ]

I have changed the thermostat and it still does the same thing. Last year we changed the sequencer and fixed it for awhile but it started the same thing this year. There is something blowing the sequencer. I olmed the heat strips out and it has two, they are good. And I am wondering if I have a bad...

No glow [ 2 Answers ]

I have a pitbull\rottweiler he is 5mo. His coat is not shinning the way I think it should.

View more questions Search