 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Wesco 20EU heat elements
I have an older home with a Wesco20EU electric furnace. A recent service call shows 2 of the 4 heat elements are burned out. I understand this furnace is no longer mfgered and replacement parts are no longer available. Where can I find these parts?
|
||||
|
||||
|
Sorry but Wesco has been out of business for some time. There elements were ribbon type and are no longer available. Some parts might be able to be adapted from more modern furnaces but that would be up to a service person to make that determination.
If you find a location that has a some Wesco parts laying around please post the source since this subject has come up before. Most folks just replace the furnace. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Where can I find parts for a Wesco furnace Model 15 UEM
I need to replace a non-functioning heating element in my 1980 Wesco electric furnace. I understand Wesco is no longer in business. Is there another manufacturer's part that will fit? The furnace is a 20kw forced air electric furnace.
I just found this site! Hopefully someone can guide me. I just bought a small old house - 1 story. It has a Wesco electric furnace, mfg date 12/27/1980. There are cold air return ducts in every room except bath, located at the bottom of the walls near the floor. The heat vents are located in...
I have a WESCO uem 20kw electric furnace, about 25 yrs old, It had a single temp stat first then a setback stat was installed, with a box added to the furnace controls, the set back stat failed after a few years so I put the original single temp stat back and it worked for years now, a while back...
View more questions Search
|
