Ask Experts Questions for FREE Help !
Ask
    jwatl's Avatar
    jwatl Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 14, 2008, 03:09 PM
    What does "F35" on a Kenmore Elite Washer Mean?
    My wife just received a new Kenmore Elite washer. There is a flashing message "F35" that continues and she cannot turn it off. What does it mean?

    Also, she will set the controls at what she wants to wash. It will go through the suds cycle, and then the 'F 35' comes on>

    What am I not doing right?

    Thanks!
    ScottGem's Avatar
    ScottGem Posts: 64,966, Reputation: 6056
    Computer Expert and Renaissance Man
    		  
    #2

    Dec 14, 2008, 03:14 PM
    Quote Originally Posted by jwatl View Post
    What am I not doing right?
    Well one thing you are probably not doing right is not reading the instructions. Most appliances have a listing of error codes in the back of the manual.

    The same as where you initially posted this. I moved this from the Forum Help area which is clearly marked as only for questions about using this site. To get there you had to scroll past the Appliances forum whenre I moved this to.

    I would also check the manual for a support number. Generally you can call someone with questions like this while the appliance is in the warrantee period.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Elite HE3 washer "F02" error [ 1 Answers ]

Kenmore Elite HE3 washer "F02" error drain problem The washer (42926200 purchased in June of 03) is not draining properly. The drain hose is not kinked or clogged. To confirm I used a small wet/dry vac holding the vac hose too the drain hose and sucked a gallon or more of water from the washer. ...

I have a Kenmore Elite HE3 washer that stops during wash cycle with an "HF" error and [ 1 Answers ]

I have a Kenmore Elite HE3 washer that stops during wash cycle with an "HF" error and the door locks and won't open

Kenmore Elite HE3 washer stops during wash cycle with "HF" error [ 0 Answers ]

I have a Kenmore Elite HE3 washer that stops during wash cycle with an "HF" error and the door locks and won't open

Kenmore "Catalyst" Elite Washer fills but that's it [ 2 Answers ]

Model # 110 20072993 My washer fills with water then does nothing-no sounds-timer does count down but never comes out of wash cycle I took the cabinet off and drained the water so I can work on it tomorrow, any help? Thanks Kevin

View more questions Search