My wife just received a new Kenmore Elite washer. There is a flashing message "F35" that continues and she cannot turn it off. What does it mean?

Also, she will set the controls at what she wants to wash. It will go through the suds cycle, and then the 'F 35' comes on>

What am I not doing right?

Thanks!

Quote:

---

Originally Posted by jwatl

What am I not doing right?

---

Well one thing you are probably not doing right is not reading the instructions. Most appliances have a listing of error codes in the back of the manual.

The same as where you initially posted this. I moved this from the Forum Help area which is clearly marked as only for questions about using this site. To get there you had to scroll past the Appliances forum whenre I moved this to.

I would also check the manual for a support number. Generally you can call someone with questions like this while the appliance is in the warrantee period.