Ask Experts Questions for FREE Help !
Ask
    jodi1's Avatar
    jodi1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 14, 2008, 06:26 AM
    Bleeding hot water baseboard heaters
    I have an oil hot water heating system, I have air in the lines but no bleeders on the baseboards. How can I get the air out.
    Thank you
    Jodi
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 14, 2008, 10:28 AM
    If you have no bleeeders you best be calling a pro for a On Site visit. It might need to have a pressure bleed and no way with so moany different setups can I explain that here. Have them install some HIGH vents to prevent this problem in the future.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bleeding a baseboard hot water heating system [ 2 Answers ]

I have a oil fired hot water boiler with baseboard heating. I have to replace the circulator and want to know how to bleed the system and then refill it when I am done. What is the proper procedure for this and what tools will I need?

Bleeding Hot Water Baseboard System [ 2 Answers ]

I have a gas fired boiler that heats water, uses 1 circulator pump to pump water to 2 zones (each with its own thermostat), using copper pipe to baseboards with fins. I am having difficulty bleeding the air out. One zone heats fine, the other not at all. I think there may be some kind of air...

Baseboard heaters not getting hot [ 1 Answers ]

My apartment has five Marley C Model TA2ANWC, double thermostat, 22 amps 120-277 baseboard heaters. All are wired with 10-2 AWG. One double circuit breaker is marked with two 60s and the three units work fine. The other double circuit breaker is marked with two 50s and operates the other...

Is water baseboard bleeding required with auto bleeders? [ 1 Answers ]

I am replacing a bad boiler. Some of my baseboards are extremely difficult to get to due to built in furniture. If auto bleeder valves are in place, is it necessary to bleed each baseboard, or will the system eventually complete the process?

Electric baseboard heaters -wiring 1 thermostat to two heaters [ 2 Answers ]

I would like to heat my new garage with electric baseboard heaters. The new garage is 20X24 feet. I would like to use only one 240V #12 2 wire circuit running two heaters at a total of 3800 watts. I plan to use 2 pole 20A breakers and 2c #12 wire. I would like to have both heaters controlled...

View more questions Search