Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacement of Carrier Heat Pump Thermostat with Honeywell TH6000 series thermostat.
[ 4 Answers ]
I have a Carrier Series 50QT Electric heat pump that still uses the original non programmable thermostat. I am trying to replace it with Honeywell TH6000 series programmable thermostat. The wiring on the existing Thermostat as follows: O - White, I am thinking this is the Reversing Valve? Y...
Wiring codes from old Carrier thermostat to new Hunter thermostat
[ 1 Answers ]
WIRING CODE HELP FOR THERMOSTAT I am in an office and have an old Carrier programmable thermostat which no longer works. I purchased a Hunter 44660 thermostat to replace. My problem is that the wiring codes on the previous thermostat do not match up the codes on the new thermostat. Codes and...
Lennox thermostat replacement with Honeywell-wiring
[ 2 Answers ]
I am trying to replace a heat pump thermostat. It was a Lennox Thermostat and I am replacing with a Honeywell R TH3100C. The letter wiring designations do not match up. On the Lennox I had R, V, F, M, L, A, Y, X the E (did not have any wiring hooked to it). My options on the Honeywell is E, AUX, Y,...
Wiring direction for a multi wiring system thermostat!
[ 3 Answers ]
I have a 2 wire system (3 phase), need to connect multi wiring system thermostat! Need to know if, its correct to just use line#1, and the device already has a jumper?
Wiring a replacement Honeywell Thermostat
[ 1 Answers ]
I purchased a Honeywell Vision 5-1-1 Day programmable thermostat to replace a Lennox thermostat (51H4301). This is an all electric heat pump type unit (Lennox HP 21-511-5P). According to the Honeywell manual, if the old thermostat has wires W1, Y1 and W2, some system modification is required. Call... View more questions Search
|