Ask Experts Questions for FREE Help !
Ask
    dddcubed's Avatar
    dddcubed Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Dec 14, 2008, 07:08 AM
    Furnce won't stay lit
    My furnace is a goodman gmp903 the draft fan is seemingly always on and then the igniter heats up the furnace lights but only for about 4 or 5 seconds the flame goes out and starts this cycle all over again any help?
    PASSERVE's Avatar
    PASSERVE Posts: 9, Reputation: 1
    New Member
    		  
    #2

    Dec 14, 2008, 07:48 AM

    Probably the flame sensor is oxidized- clean the sensor with steel wool or small wire brush usually woks.
    dddcubed's Avatar
    dddcubed Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Dec 14, 2008, 07:55 AM

    I'm not sure wher the flame sensor isorwhat it looks like
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Coleman electric presidential furnce [ 1 Answers ]

Hi I have a coleman electric presidential II furnace serial #117960300 model# 3123B750blower #3123A590 when I turn the heat on it will heat and work fine but then the blower stops and the heat keeps heating it gets very hot and I have to trip the breaker to turn it off can any one help me thank you...

Heil furnce [ 1 Answers ]

Polite light will not stay lite

Fan doesn't come on for AC or furnce [ 1 Answers ]

I have a furnace that is about 14 years old, and a central air conditioning unit that is about seven years old. I noticed yesterday that, although the house was cool, the fan was not blowing. It will not blow when either the heat or the AC is on. I turned everything off. Please advise as to...

View more questions Search