 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Building a shower stall base with waterproof membrane
I plan on ripping out the old tub in a mobile home, and installing a walk in shower. What is the correct sequence of steps required to build up the base, slope the thinset or cement, and install the membrane. Is there a video available. I plan on ceramic tiling the stall once it is ready.
|
||||
|
||||
|
Here you go! Mortar Bed Shower Floor for Tile Showers
You will use a flange type shower drain,(see image)and Blue Compaseal(see image) to pan the shower. Let me know if you need more info. Regards and thank you for ration my answer. Tom |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Would like best method for building mortar base tile shower with tile wall. I have a slab with 2" drain pipe coming out of the floor. Replacing a fiberglass insert which keeps failing at the drain connection. I believe because of weight. People using fiberglass shower exceed 300 pounds. Please...
In my basement I have an old shower stall that was installed by the former owner. The stall also has the air conditioner drainage hose directed through the bottom of shower stall and it drains into the shower drain. That is not my idea of sanitary! Also, there is no top (cover) over the stall. ...
There is a leak between the acrilic wall and the shower stall pan. Caulking using acrilic did not help. Shall I cut the plastic wall and/or use some special sealing material? Thanks!
I purchased a house with an unfinished half bath. The shower base was not installed. There is a cast iron pipe coming up through the slab.there is a drain leaded into the pipe with a flange and a liner that is cut off,and a threaded 2" drain screwed into it,it has been there a long time and I...
View more questions Search
|
