Ask Experts Questions for FREE Help !
Ask
    wz2v2k's Avatar
    wz2v2k Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 4, 2008, 07:27 AM
    Themostat problems
    I have a maple chase thermostat and the room temperature setting on the thermostat does not get to room temperature. For example, I will manually set the temperature to 78 and the thermostat number is at 72, it will stay there it will get to 78 degrees.

    Not sure what is the problem.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 4, 2008, 11:16 AM
    Maple Chase thermostats can be a problem. The quality in my opinion is not all that good. A draft on the thermostat can cause problems and well as the anticipator setting in the thermostat itself. Look at the original instructions that came with the thermostat or do a Google and find one. Then see if it has a adjustable heat anticipator or a corrective setting for the thermostat itself.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Faulty Themostat? [ 1 Answers ]

WE have a zoned hvac system and we are having problems with the master ( first floor ) themostat. It is a Honeywell Trolatemp and it appears that the air conditioning is not shutting down in accordance with the tempature that we have set. It just keeps getting colder and colder until we turn the...

My Totaline themostat [ 1 Answers ]

My Totaline P474-0100 Digital Thermostat is not working it is flashing Fd message

No heat themostat problems [ 1 Answers ]

I have a maple chase thermostat and the batteries went dead. Now I can't get the heat to kick on. What do I do?

Programmable themostat problems [ 1 Answers ]

I purchased a noma programmable thermostat.last year .ilost instructions have it working but don't understand how to set it.itseems like its working good for a while then temp drops about 7 degrees celseus,yhen I turned it up to 28c then it kicked in 10 minutes. Latter.if you have a manual who to...

New themostat [ 2 Answers ]

I have just bought a new programmable themostat and in the directions it says it is not compatible with a mulistage furnace. My furnace is a Lennox Pulse.

View more questions Search