Ask Experts Questions for FREE Help !
Ask
    dannysready's Avatar
    dannysready Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 17, 2007, 06:23 PM
    Programmable themostat problems
    I purchased a noma programmable thermostat.last year .ilost instructions have it working but don't understand how to set it.itseems like its working good for a while then temp drops about 7 degrees celseus,yhen I turned it up to 28c then it kicked in 10 minutes. Latter.if you have a manual who to use or any help would be help full thanks danny
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 18, 2007, 08:50 AM
    Noma has about 50 different thermostats. Which one do you have ?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Noma themostat 52-2570-6 [ 5 Answers ]

WE purchased a Noma programmable thermostat yesterday and are severally frustrated. Hook up was easy but when we connect it the room temperature will not display it reads "HI". Can anyone tell us what we are doing wrong?? It is a two wire system with only a red and white wire. The red is...

New themostat [ 2 Answers ]

I have just bought a new programmable themostat and in the directions it says it is not compatible with a mulistage furnace. My furnace is a Lennox Pulse.

Themostat replacement [ 3 Answers ]

I am replacing old line voltage thermostats and want to use Honeywell digital programmable units. My current configuration is 2 wire but new thermostats are 4 wire. This is a 240V system with multiple heaters in parallel. Can I use the new thermostats and how do I wire them if I can use...

Program noma themostat [ 1 Answers ]

Purchased a new home with a noma programmable thermostat no instructions were left at the house. How do you program the air conditioning.

Themostat wiring installation [ 1 Answers ]

I just bought a new themostart to replace with the old one I only have heating and the wiring diagram showing I have to connect one to R and one to W(heating relay) The wire I have from the wall one is red and one is white which I don't know which one should I connect to the R and which one...

View more questions Search