Ask Experts Questions for FREE Help !
Ask
    micktheimp's Avatar
    micktheimp Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 3, 2008, 04:47 AM
    Dyson belt
    How do I change the drive belt on my dyson?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 3, 2008, 06:17 AM
    Belt replacement hard or impossible - Its supposedly a lifetime belt that is entirely enclosed in plastic to protect it from tangles and dirt causing friction. I have never changed one but I am sure it is a pain.

    BTW you have to replace the entire belt cartridge and they run about 70.00 for the part only.
    Tech610's Avatar
    Tech610 Posts: 7, Reputation: 1
    New Member
    		  
    #3

    Dec 5, 2008, 06:44 AM
    Quote Originally Posted by hvac1000 View Post
    Belt replacement hard or impossible - Its supposedly a lifetime belt that is entirely enclosed in plastic to protect it from tangles and dirt causing friction. I have never changed one but I am sure it is a pain.

    BTW you have to replace the entire belt cartridge and they run about 70.00 for the part only.

    What you need is a clutch assembly. It is a moderate task and requires torq bits size 15, flat head, and a lot of hand power.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Dyson DC04 belt keeps coming out! [ 3 Answers ]

Hi, My DC04's belt keeps coming out. Also recently within a couple of months two belts have also snapped. Can anyone advise why this is? Thanks

Dyson Dc07 [ 24 Answers ]

I have a Dyson DC07. It won't pick anything up although the motor is working okay. I have cleared all the obvious areas and have washed the filter. Although after clearing these areas, it will pick up with very weak suction for a few minutes using the attachment, it then stops and I end up...

Dyson DC07 drive belt replacement [ 3 Answers ]

Hi all. Does anyone know how to replace the beater brush drive belt on a Dyson. I have a DC07 Animal (the purple one). If you look at it from underneath with the sole plate removed the belt goes round the beater bar and disappears upwards behind a plastic housing. I assume this must be removed but...

Dryer Belt broke and belt tension pulley fell out. Where does it go? [ 1 Answers ]

When the dryer belt broke, the belt pulley fell to the bottom of the dryer. I can't find where to put it back. The dryer is 25 years old. I don't want to pay for a service call. Is there a manual on line?

View more questions Search