Ask Experts Questions for FREE Help !
Ask
    itsjeff829's Avatar
    itsjeff829 Posts: 11, Reputation: 1
    New Member
    		  
    #1

    Dec 2, 2008, 05:34 PM
    Burner motor won't stay on
    Have a gas forced air furnace. Not sure of the name brand. When it calls for heat, the burner kick on, but won't stay on. They will burn for a short period, then they will turn off. The fan motor stays running, but I had to turn the start temp for the fan way down so it would blow what warm air there is in the unit out. It just keeps repeating the cycle. I put in a new fan limit switch and it does the same thing. My next step I think is to get a new flame sensor. If this does not fix the problem, I don't know what to do after that.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Dec 2, 2008, 06:56 PM

    Have you cleaned the flame sensor that you already have?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace burner does not stay long and goes out [ 3 Answers ]

My furnace burner does not stay long. I had my pilot light goes out. I lit the pilot light and it works. And as soon as I put the wall thermostat on ON position for heat, I can see the burner starts with the normal flame. But after 30 seconds burner flame goes off as well the pilot light goes out...

Burner won't stay lite [ 1 Answers ]

I have a Maytag Neptune MDG3000AWW gas dryer that will lite in all three modes (intellidry , time dry/air fluff, and intellidry ) but will only stay lite of 8 to 10 seconds. After ltwo or three minutes it lites again for another 8 to 10 seconds. Takes all day to dry a load.

Cd burner won't burn playable discs [ 3 Answers ]

My dvd/cd burner burns dvds but when I burn a cd it will not play in anything I put it in

Burner motor keeps running? [ 1 Answers ]

I have a miller gas furnace in my mobile home.The gas will kick on with burner motor blower,blower fan then kicks on until temperature is reached.The gas will shut off,then the blower motor will shut off but the burner motor will continue to run.I have to open bottom door and work the white button...

Burner won't light [ 4 Answers ]

When I turn on the furnace the burner doesn't turn on what should I do?

View more questions Search