 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
York furnace dimond 80 contrl board
Hi. I have a York furnace that the blower fan will not come on. I have it by pass and the blower runs and heat works. I know the problem might be the control board, my question is can it be repaired and how? I can not aford to replaced the board for right now. Thank you.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a York Stellar Furnace in my newly purchased house. Furnace is 15 years old. Furnace is releasing hot air from front grills and heats up furnace room to 110 Degrees. I had a Bryant Furnace in another house and this never happened. All plenams and ducts are taped and sealed so the heat is...
It looks like I have a couple of loose blades touching the housing and that makes a terrible screeching. The motor seems OK. The unit is 13 years old. It looks like I need to replace the blower. Would you please tell me where to get one and an estimate. Thx
I have a Beckett AFG burner with a Beckett R7184A Interrupted Ignition Oil Primary Control. The fuel line filter was clogged so I replaced it with a new one. When I turned power back on the burner tried to ignite but after 10 seconds or so it shut down. Now the burner will not start and the...
I have a York Diamond 80 Gas furnace approx. 11 years old, and I have a problem w/ Blower not shutting down. Runs constant.. This has happen intermittently, but now it will not shut down at all. Heat works, but once the exchanger cools down the fan still keeps running until the cycle calls for heat...
Furnace works fine then turns off when house warms up to temp. will not come back on until I turn furnace off and on . Code flashes one time saying system lock out. What should I do ? Thanks mario
View more questions Search
|
