Ask Experts Questions for FREE Help !
Ask
    lescorpion's Avatar
    lescorpion Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 24, 2008, 07:39 PM
    York Dimond Heater blower noisy
    It looks like I have a couple of loose blades touching the housing and that makes a terrible screeching. The motor seems OK. The unit is 13 years old. It looks like I need to replace the blower. Would you please tell me where to get one and an estimate. Thx
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Oct 24, 2008, 11:27 PM

    From local york dealer, is where I would start
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #3

    Oct 24, 2008, 11:27 PM
    Call locally for a estimate. The same place that gives you an estimate will have the parts.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

York Dimond 80 Gas Furnace, No Blower shut down [ 1 Answers ]

I have a York Diamond 80 Gas furnace approx. 11 years old, and I have a problem w/ Blower not shutting down. Runs constant.. This has happen intermittently, but now it will not shut down at all. Heat works, but once the exchanger cools down the fan still keeps running until the cycle calls for heat...

Furnace Blower Noisy [ 3 Answers ]

I just bought a house with a probably 50+ year old furnace. It is made by International Heater Company, Utica N.Y. It is 80,000 BTU and the house is 900 square feet. It works perfectly except when the blower comes on it is so noisy. Any remedy to cut out the noise. The repairman said old furnace...

Noisy Blower Motor [ 4 Answers ]

I had the 1 hp blower motor on my furnace/air conditioner replaced in December 2005. In the last 2 days, it has gotten extremely loud. It still works, but it sounds like there's an airplane in my basement. Any ideas about what could be going wrong? Is it something that can be fixed or will I...

Noisy blower [ 2 Answers ]

I have a gas furnace (Day and Night brand) that is about 25 years old. It heats fine but has an extremely noisy blower motor. It is a loud combination of thump, thump,thump with a lot of sheet metal noise. The blower is direct drive (no belt) and I cannot see without doing a complete...

Noisy blower startup [ 8 Answers ]

In mid-summer I had the blower motor and capacitor replaced in my Comfortmaker RPG II 150,000 BTU natural gas furnace. (The bearing was going out in the motor). This is a direct-drive squirrel cage blower. Since being replaced, it makes a loud 60hz hum startup noise. It varies in pitch as the...

View more questions Search