Ask Experts Questions for FREE Help !
Ask
    Goldie1's Avatar
    Goldie1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 26, 2008, 06:41 AM
    Framing for a 9' closet door
    I have a 9 foot opening for a closet door and am not sure about what size I should make the rough opening for the bypass doors.
    Thx for your help.:)
    KBC's Avatar
    KBC Posts: 2,550, Reputation: 487
    Ultra Member
    		  
    #2

    Nov 26, 2008, 09:18 AM

    Bi-fold doors?

    Call your supplier and ask them what the R/O is,they will give you the in's and outs of doing this.

    KBC
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Metal Stud framing for a door [ 3 Answers ]

How do you frame in a door using metal studs?

Framing interior door in non bearing wall [ 1 Answers ]

Can I toe-nail header into a bearing stud (king) on one side and use jack and king on other to keep door tight to one side of an existing opening that I am making smaller?

Metal framing for a door? [ 1 Answers ]

I am finishing my basement and I am using metal studs. I need to know how to frame for door. Help!

Interior Door Framing - Basement [ 1 Answers ]

I've framed around the exterior walls of my basement. I will be framing a partition wall in a few weeks which will include framing for interior doors. My plan is to buy pre-hung doors, I have seen they only come in one standard height - which would require a framing height of 82 1/2". My problem...

Framing a door opening with metal studs [ 1 Answers ]

Hello all, I am adding a guest bedroom and bath to our finished basement. I purchased 2 1/2 wide studs (as they were less expensive). However I don't know how to fram the door opening with this size stud. Do I need to return the 2 1/2 and exchange or the normal size stud or is there another...

View more questions Search