Ask Experts Questions for FREE Help !
Ask
    jared13's Avatar
    jared13 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 24, 2008, 02:25 PM
    Well pump
    I thawed out the pipes at my modular, but still no water, how do I diagnose that it is my well pump?
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
    		  
    #2

    Nov 24, 2008, 06:08 PM

    Is your pump above ground or submersible (in the well)? If above ground, then the motor should run once you know the pump is thawed out (assuming it froze... absolutely not a good thing). The motor is not affected by cold weather, but the pump itself is. Of course, be sure the breaker is on.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Submersable Pump - 220 volt - Capacitor Overheating - Pump Shutting Off [ 16 Answers ]

My 220 volt submersable well pump stopped working. We took the capacitor in to be checked one day and it was fine. The next day we took the relay in and it checked out. The following day I pressed on one of the wires that goes to capacitor and the well came on. The wire was old so I knew it...

Pump pressure switch for well pump [ 3 Answers ]

I was wondering if seomone can help me I have a pressure switch which has a little leak but I can't really tell how I could fix it doesanyone have any suggestions or pics on how to fix it

How do I get my well pump to pump up water? [ 1 Answers ]

Recently my deep well jet pump suddenly stopped working. We brought the motor to a shop that fixed it and then we connected it back to the pump. Afterwards we pulled this white plug from the top and attempted to prime it by pouring water into it. However, after pouring in a gallon of water the hole...

Pool pump and booster pump timer diagrams [ 2 Answers ]

I am looking for a diagram that shows how to hookup two intermatic timers to the pool pump and the booster pump. Running 220volts

Sewage pump/ejector pump [ 2 Answers ]

My sewage/ejector pump sometimes won't shut itself off. It has gradually gotten worse as time goes by. What could be causing this? Any suggestions appreciated.

View more questions Search