Ask Experts Questions for FREE Help !
Ask
    Wesley Hogeland's Avatar
    Wesley Hogeland Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 21, 2008, 07:09 PM
    Bathroom plumbing
    Advise on the proper fitting to convert my 3 inch copper waiste to 3 inch pvc
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Nov 22, 2008, 05:19 AM
    Hey Wesley...

    You will want to purchase a MISSION or PROFLEX-style banded transition clamp.. see picture below.

    These are sometimes available at the home supply stores... otherwise, off to a PLUMBING SUPPLY HOUSE to order a:

    3" pvc x 3" copper mission clamp. This is a legal and reliable way to make this transition.

    Let us know if you have more questions...

    MARK
    Attached Images
     
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Plumbing in Bathroom [ 1 Answers ]

Has anyone out there used Ipex Aqua Pipe and fittings in there bathroom?? I am getting a lot of conflicting answers on whether I should use it with its compressions fittings behind my walls or not. If anyone has used it I would appreciate your comments!! Thanks

Bathroom Plumbing [ 3 Answers ]

Has anyone used Ipex Aqua Blue piping and compression fittings in their bathrooms?? I am getting a lot of different answers about using them behind a wall.

Plumbing in the bathroom [ 1 Answers ]

The water pressure in my bathroom sink went to almost nothing. It did not happen to the toilet or the tub. What is going on and how do I fix this myself?

Bathroom plumbing with basement bathroom [ 1 Answers ]

Could you please tell me what cause my upstairs bathroom to back up into my basement bathroom?

Bathroom plumbing [ 2 Answers ]

I'm doing some renovations in a home built in the mid 50's. The waste lines are all cast iron. The toilet flange needs to be replace so I have decided to change all waste lines to PVC. The toilet has a 4" bend with a 2" connection for the tub drain. The line drops below the floor about 6" to 8",...

View more questions Search