Ask Experts Questions for FREE Help !
Ask
    kpone's Avatar
    kpone Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 10, 2008, 08:35 PM
    Furnace not working
    I turned on. Or tried to turn on my Tempstar furnace Friday night and nothing happened. So tried the air conditioner and it worked. I don't know where to start. PLEASE HELP!!
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Nov 10, 2008, 08:46 PM

    Standing pilot or spark ignition, or hot surface ignition.
    dac122's Avatar
    dac122 Posts: 463, Reputation: 17
    Full Member
    		  
    #3

    Nov 11, 2008, 06:54 AM

    To be of some assistance we're going to need more information, such as Model and efficiency (80 or 90+), what are you hearing and seeing on the tstat and on the furnace when you have the tstat call for heat. Also what is your knowledge and skill level in diagnosing this problem? Are you just trying to pare down the possibilities for a tech to come in, or do you want to fix it yourself?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Working on a furnace/ac [ 1 Answers ]

The heat will will work,but not the ac,I replaced the thermostatbecause the heat would not stay on,so I replaced the thermostat.welll the heat worked great but not the ac any idas??

Furnace is not working [ 2 Answers ]

I have a thermostat that is showing the house to be 60 degrees while it is set for 72. The furnace will not come on when in the auto mode and when switched to on for the blower, Nothing will come on. This is a lennox elite system with a honeywell digital thermostat. Thanks for any help you can...

Furnace not working [ 1 Answers ]

I have an Ultra V Tech 80 Armstrong Air furnace that is not working but there is a green blinking light. What do I need to do to get it working... the furnace was working this morning.

Furnace not working [ 2 Answers ]

I have a payne HVAC and burner will come on, when I went up in the attic to check it out I noticed a part missing, I believe it was the alternate limit switch, would this cause for the unit to not come on, do I need a switch? Thanks in advance to whom ever can answer my question!

Furnace not working! Help! [ 4 Answers ]

We have a Montgomery Ward 700 furnace with central air. It worked fine all summer. My husband turned the heat on about two weeks ago and all was well. A couple of days ago it started to act up. It would kick on and the blower would come on and kick off in a few seconds. Every three or four minutes...

View more questions Search