Ask Experts Questions for FREE Help !
Ask
    JenAshley's Avatar
    JenAshley Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 31, 2007, 08:17 PM
    Furnace not working
    I have an Ultra V Tech 80 Armstrong Air furnace that is not working but there is a green blinking light. What do I need to do to get it working... the furnace was working this morning.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 31, 2007, 10:03 PM
    Count the number of blinks. Look on the inside of the door for a legend and read what the number of blinks relate to. Then replace the defective part.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace is not working [ 2 Answers ]

I have a thermostat that is showing the house to be 60 degrees while it is set for 72. The furnace will not come on when in the auto mode and when switched to on for the blower, Nothing will come on. This is a lennox elite system with a honeywell digital thermostat. Thanks for any help you can...

Furnace not working [ 3 Answers ]

I have a Goodman GMP100-4. It does not ignite. I have followed the written instructions and cleaned any debris arount the unit. Suggestions?

Furnace not working [ 2 Answers ]

I have a payne HVAC and burner will come on, when I went up in the attic to check it out I noticed a part missing, I believe it was the alternate limit switch, would this cause for the unit to not come on, do I need a switch? Thanks in advance to whom ever can answer my question!

Furnace not working! Help! [ 4 Answers ]

We have a Montgomery Ward 700 furnace with central air. It worked fine all summer. My husband turned the heat on about two weeks ago and all was well. A couple of days ago it started to act up. It would kick on and the blower would come on and kick off in a few seconds. Every three or four minutes...

Furnace not working [ 1 Answers ]

I have a Intertherm Split System A Frame unit. I turned the furnace on and it came on ran for about 1 min and went off. It did this 3 or 4 times then I turned if off. It was blowing heated air through vents, it just kept shutting off and comeing on every 1 min or so till I turned it off. Now it...

View more questions Search