Ask Experts Questions for FREE Help !
Ask
    calamaras's Avatar
    calamaras Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 28, 2008, 03:56 PM
    Heater york
    Troubleshooting pressure switch stuck open on a york heater.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
     
    #2

    Oct 28, 2008, 06:00 PM

    What is the question?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hotwater heater keeps needing breaker on the heater reset? [ 6 Answers ]

Hotwater heater keeps needing breaker on the heater reset? About every 4 or 5 days I have to go hit the red button on the heater and reset it. Its electric. Its only 2 years old and nevr has any problems so far. What gives?? TIA

York Dimond Heater blower noisy [ 2 Answers ]

It looks like I have a couple of loose blades touching the housing and that makes a terrible screeching. The motor seems OK. The unit is 13 years old. It looks like I need to replace the blower. Would you please tell me where to get one and an estimate. Thx

Water heater hookup with sidearm supplimental heater [ 0 Answers ]

Hello: I'm hooking up a sidearm heater to an existing electric water heater for use with an outdoor wood furnace. I've seen diagrams showing the upper port of the potable water side hooked up to the anode port, the TPV port, and the cold water inlet port. My initial thought is that plumbing it into...

Wall heater pilot light lit, but cuts off when I turn heater on [ 6 Answers ]

I have a wall heater, the pilot light was out so I re-lit it a couple days ago and it went on.. about 4 hours later I noticed it was out again... same thing off and on for three days... this time I lit the pilot and turned the heater on it immeditly made a click sond and went out completely... it...

York Heater - Pressure Switch Stuck Open [ 4 Answers ]

I have a York heater that won't heat our second floor. The indicator LED light flashes three times which means the Pressure Switch is Stuck Open. Is there a way I can fix this myself? If so, how? Thanks in advance for any help. John


View more questions Search