Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Dj lighting
[ 1 Answers ]
I'm a music dj, I have a circuit box with 8 channels that say I can put 10 amps per channel. The box says I can it has a 15amp breaker. The question I'm asking is can I put a total of 80amps since I have 8 plugs?
Tv hit by lighting I think?
[ 4 Answers ]
Sitting here 1 night and it was storming a little, then all of a sudden lighting struck and the TV made a nosie and went out. Like a frying nosie. Do u thank lighting could have hit it ? It well not come on it well come on then go off (with no pic) Can it be fixed or should it be trashed. It is a...
Lighting
[ 2 Answers ]
I apologize in advance for my lack of knowledge. In my basement I currently have a single 20A circuit with 6 lights on it, rated at 150W each, controlled by a single light switch. I'd like to know if its possible to break these lights up without adding circuits. Is it as simple as adding a...
Under kitchen cabinet lighting
[ 1 Answers ]
I bought two sets of touch sensitive under cabinet kitchen light set put them in but one set keeps flashing then stops all together I've replaced the transformer and the touch switch but the wires in the six port connector, when you move the wires there the light go out two which one you touch ....
Kitchen cabinet lighting
[ 1 Answers ]
I've purchased hampton bay under cabinet lighting and the sets are limited to up to 200watts. If I have 2 sets can I splice the 3 setting dimmer switch to activate the 2 mutiple outlet strips? View more questions Search
|