Ask Experts Questions for FREE Help !
Ask
    daveanthes's Avatar
    daveanthes Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 24, 2008, 12:49 PM
    Rudd thermostat to Honeywell
    I have a Rudd Thermostat with the following wires and connected to the poles below

    green, red, Blue, yellow, white, brown
    G R B Y W2 X x has a jumper to E

    my new Honeywell thermostat has the following poles

    Rh Rc W Y G

    can anyone help me connect these?


    thanks


    dave
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Oct 24, 2008, 06:26 PM
    You need a heat pump thermostat if you have a heat pump. Your new Honeywell thermostat is not for a heat pump. Take it back and get the correct one. You better mark and label each wire where it is located and color on the old thermostat before removal. It tells you that in the instructions.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacement of Carrier Heat Pump Thermostat with Honeywell TH6000 series thermostat. [ 4 Answers ]

I have a Carrier Series 50QT Electric heat pump that still uses the original non programmable thermostat. I am trying to replace it with Honeywell TH6000 series programmable thermostat. The wiring on the existing Thermostat as follows: O - White, I am thinking this is the Reversing Valve? Y...

Changing from a Rudd to a Hunter thermostAT [ 1 Answers ]

I bought a hunter 44360 digital thermostat to replace a Rudd. The Rudd was wired Y-Yellow, G-green, E-White, R- Red, B-Blue, and a brown on X. The Hunter has G, RC, RH, Y/O, W/B and Y1. I can't seem to get the outside fan to run. Also before changing the thermostat, the blower fan constantly...

Changing from a Rudd to a Hunter thermostAT [ 2 Answers ]

I bought a hunter 44360 digital thermostat to replace a Rudd. The Rudd was wired Y-Yellow, G-green, E-White, R- Red, B-Blue, and a brown on X. The Hunter has G, RC, RH, Y/O, W/B and Y1. I can't seem to get the outside fan to run. Also before changing the thermostat, the blower fan constantly...

Changing from Rudd to Honeywell Thermostat [ 2 Answers ]

I am trying to change from a Rudd thermostat and system to a Honeywell RTH 7500 Thermostat. Having problems with the wiring as it does not work properly. The system that I have is a heat pump in the attic with auxiliary heat and an air conditioning system outside. I am not sure if this should be...

Honeywell Chronotherm IV Plus Honeywell Thermostat, T8624D [ 1 Answers ]

Honeywell Deluxe Programmable Multistage Thermostat, #T8624D Chronotherm IV Plus I have 2 of above thermostats and have had for about 5 years. It takes no batteries and is directly connected to a 24 volt source. Have one upstairs and one downstairs. Have noticed at times that the LCD on...

View more questions Search