Ask Experts Questions for FREE Help !
Ask
    frebrd18's Avatar
    frebrd18 Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Oct 16, 2008, 03:48 PM
    Kenmore Dishwasher Hi Temp Scrub Flashes-Ends Cycle
    Hi,
    I have a Kenmore Ultra Wash Dishwasher (665.15822000) that is about 8 years old. It has started running for about the first 10-15 minutes of its cycle and than going to 2 min remaining on the digital display and ends leaving the hi temp scrub light flashing. I reset it about a week ago using the tips on this site, hi temp scrub - air dry 3 times and the unit worked for a few cycles. I also reset the breaker at that time. Now it is doing the same thing. Does anyone have any ideas for moving forward with the diagnosis? It's been a good dw up to this point, and I'll probably sink a little $ in parts into it before I replace it. Any help would be appreciated.
    frebrd18's Avatar
    frebrd18 Posts: 5, Reputation: 1
    New Member
    		  
    #2

    Oct 21, 2008, 06:29 PM
    The DW runs a complete cycle in china/gentle with the air dry selected which I think does not use the heating element through the whole cycle. The heating element is about 50-60 bucks at searsparts and if it will get me a year or two it's worth it. Has anyone seen these symptoms? Its an Kenmore Ultrawash 665.16822000.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Elite Dishwasher will not start any cycle, will drain [ 14 Answers ]

I have a Kenmore Elite dishwasher with "Sensor ATC" and "Ultra Wash" and "Quietguard Elite" across the front of the appliance face. It has worked perfectly until yesterday. It will not start on any cycle. I CAN get it to drain by hitting the CANCEL button. I have tried to get it to start a FAVORITE...

Kenmore Dishwasher "clean" light flashes won't run? [ 4 Answers ]

I have a Kemore dishwasher Model #665.17019401, the clean light keeps flashing and it will not run. You press normal wash and start and the start button blinks but will not start. The manual says it may be the heater circuit, but that is not a part name I guess it has to do with the hetare...

Water miser light flashes on my kenmore dishwasher [ 3 Answers ]

I bought a used Kenmore Dishwasher 665-16712000 9 months ago and it has worked great until now. The water miser light just keeps flashing and it won't start any cycle. If I hit the cancel/drain button the water miser light, the quick dry light, and the cancel/drain light all flash. Eventually...

Kenmore Elite Dishwasher - Drains, won't select Cycle, Don't have Heated Wash/Dry [ 7 Answers ]

I have a Kenmore Elite Dishwasher that started a problem today. When you press Start, I get a 2 min countdown on the front and what sounds like drain, but it won't let me select any cycles. I want to reset it, but I can't find a manual (I'm a renter) or a model number. I even pulled the...

Cannot clear lock cycle on Kenmore elite dishwasher [ 1 Answers ]

I have a 2 drawer Kenmore elite dishwasher. I cannot clear the lock cycle. I have cut the power to the dishwasher, but that did not clear the lock cycle. I have tried hitting several different pads on the dishwasher, but nothing works.

View more questions Search