Ask Experts Questions for FREE Help !
Ask
    johndeere1's Avatar
    johndeere1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 19, 2008, 06:53 PM
    hunter 44110 to rheem rbha-17j10sfdai termostat
    I am trying to replace my rheem termostat with a hunter 44110. Here is the wiring I have on the old one

    green to G
    Red to R
    orange to B
    yellow to Y
    blue to W2
    brown to X



    The new hunter has the following to put wires.


    G , RC , RH , Y , W



    So I have 6 wires hook up to the old one and 5 places to put wires on the new one. Can someone please help on how to match up these wires.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Oct 19, 2008, 07:16 PM
    I believe you have the wrong thermostat.

    Looks like you need one for a 2 stage heat pump and the one you have is for a gas/oil/ or single stage electric.

    If you are going to get a new thermostat get a good one. Honeywell or White Rodgers

    Hunter is not so good in my opinion.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring for a hunter 44110 thermostat [ 3 Answers ]

My old therostat has two wires. I don't know where they hook up at in the hunter I bought the old wires are a red one and a white one I the old therostat is a robertshaw any help would be great

Hunter 44110 [ 3 Answers ]

I just replaced my old t-stat with a new Hunter 44110. Everything seems to be working fine with the A/C, except the condenser? It's just making a buzz/humm noise. The air blower in the attic turns on like it should, just the outside unit is not doing anything. Heater works just fine. I used...

Hunter 44110 message [ 2 Answers ]

I keep getting a message on my thermostat that says reco. If I hit the return button it goes away. But it just comes back later. What is it?

Hunter thermostat 44110 [ 2 Answers ]

I have hot water baseboard heat, and installed the hunter digital thermostat 44110, and followed the directions as directed, I had had wires W, Y and RH, I marked and installed Each of the wires, and put them where they were marked on the thermostat. I felt well and all of the lights ( temp,...

Hunter 44110 [ 5 Answers ]

How should the wires match up to the hunter: I have yellow, red, white, green and then a red jumper wire if I use the jumper wire and I connect all the others to the letters of the color codes what would I do with the other red wire. My AC is not cooling at all... I changed filter, batteries......

View more questions Search