Ask Experts Questions for FREE Help !
Ask
    elk400's Avatar
    elk400 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 18, 2008, 10:59 AM
    Furnace won't work
    My furnace won't work but the cental air does. The blower starts for the air but not the furnace. I replaced the igniter could it be the thermostat?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Oct 18, 2008, 03:55 PM
    Usually it is not the thermostat. What is it doing exactly? Does the ignitor glow as if the furnace is starting to lite?
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #3

    Oct 18, 2008, 04:04 PM

    Blower won't start unless you are getting flame. Need more info.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace will not work [ 4 Answers ]

I've ran the diagnostics and it says that the furnace is in full working operation. But when I set it to on it will not start up.

Furnace won't work [ 4 Answers ]

I have a Rheem upflow mid efficiency furnace with inshot burners and pilot light. It worked until last night and now when you turn it on heat or turn the temperature up the heat won't kick on. Its at 67 right now and I'm calling for 74 degrees. I've got young children in my home and its getting...

Gas Furnace Fan won't work [ 4 Answers ]

My American Standard furnace fan won't turn on. It will ignite, when it gets to the blowing stage it will turn off. All breakers check out fine. Can't find any other on/off switch inside unit. A burnt smell comes from vents, the same smell of when you first turn of the heater for the first time...

Comfortmaker Furnace Fan blows in line fuse and will not allow furnace to work [ 1 Answers ]

I have a Comfortmaker Furnace (approximately 1998/99) and the fan will not turn on allow the furnace to heat. When I try to turn the furnace on it blows a 3 amp fuse at the blower motor. I removed the fuse and jumped it and all it will do is make a faint buzzing noise and not turn on. I can...

Fan Doesn't Work When Furnace On [ 3 Answers ]

If I have the furnace on and the fan on "Auto" the fan never comes on. The furnace seems to work fine - the ignitor begins to glow, gas comes on, and burners light. After a while the gas stops for a time (before coming back on) but the furnace seems to run continuously If I turn off my furnace...

View more questions Search