Ask Experts Questions for FREE Help !
Ask
    Rick1's Avatar
    Rick1 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Oct 12, 2008, 05:32 AM
    Purging base board hot water heating system
    Upon attempting to purge base board water heater system, inlet water on, hoses connected to zone purge valve, receive little flow and no pressure registers on system??
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Oct 12, 2008, 06:19 AM
    Rick... I answered this question at your other post... check it out... :)

    MARK
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

In floor radiant heat vs. Hot water base board [ 2 Answers ]

I recently bought a home built in 1960 which is heated by hot water base board heat. I am currently renovating the house and am looking at the possibility of installing in floor radiant hot water heat for the second floor. I would install this in the floor joists in the basement before I finish the...

How to purge hot water base board system [ 1 Answers ]

How do you purge air from a hot water baseboard heating system?

Forced hot water base board heating [ 1 Answers ]

Can an existing forced hot water baseboard heating system be converted into an underlayment (tubing) type of system? Thank you. Brice Repolt Weare, NH

Base board heating requirement for basement [ 4 Answers ]

What would be the power requirement for a baseboard heater in a basement room of area about 250 sq ft. One side of the room (length = 16') has a standard walk out sliding glass door. I would prefer to stick with 120v device. Here in Minnesota, outside temperature can go below zero F, during...

View more questions Search