Ask Experts Questions for FREE Help !
Ask
    doug1957's Avatar
    doug1957 Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 11, 2008, 05:58 AM
    Hvac condenser wire hoop up
    The two 24 volt wire that runs from the condenser to the mother board of a goodman heating unit go on what terminal?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Oct 11, 2008, 11:49 AM
    The goodman unit has a wiring diagram on the inside of the blower door on the inside unit/furnace.. It will tell you there.
    ccc0427's Avatar
    ccc0427 Posts: 2, Reputation: 1
    New Member
     
    #3

    Oct 11, 2008, 02:19 PM
    Generally one is connected to common the other to y terminal
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
     
    #4

    Oct 11, 2008, 03:21 PM

    ccc0427 is exactly right.
    Also it makes no difference wich wire goes y and c
    You must also make sure that you have correct wiring from the thermostat. Please give more details as to what your setup is.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I wire up my new AC condenser fan motor? [ 7 Answers ]

My new AC condenser fan motor has an extra wire. What do I do with it? AC is a 1996 SEER 12 Rheem. New motor is an A.O. Smith 1/8 HP 208 RPM 208-230 volt. Old motor has 3 wires, black, brown, and orange. New motor has 4. Black, brown, orange, and brown with a white stripe. Does anybody...

Change 4 wire condenser motor to 3 wire motor [ 4 Answers ]

I need TO know how to wire a condenser motor. The one I am taking out is a 230 volt it has 2 brown capacitor wires and a black and white. The one I want to put in is a 230 volt/5 mfd capacitor motor. This one has a red wire a black wire and only one brown capacitor wire. How do I retrofit this....

How to wire air handler to condenser [ 4 Answers ]

Can you help with how to wire up a air handle and condensing unit

New A/C Condenser - What wire gauge for supply? [ 1 Answers ]

Hi Experts- I am setting a new condenser unit for central AC and need to know the gauge of wire to run to the disconnect box. From the Manufacturer of the condenser: 13 SEER unit (higher efficiency) Minimum Ampacity: 14.5 25 Amp Breaker LRA 68

Where to land the yellow wire off condenser fan motor? [ 1 Answers ]

I've recently tried to change out my condenser fan.My old fan was a G.E mod.#5kcp39gfp922ds it had a multi tap capacitor with a black wire leaving the motor and Landing on the defrost board at (DF2).The new motor I was given is a G.E mod.#5kcp39kgl733s.Both are the same 1/4hp, 825rpms, 208-230 V....


View more questions Search