Ask Experts Questions for FREE Help !
Ask
    jimmy jones's Avatar
    jimmy jones Posts: 3, Reputation: 1
    New Member
     
    #1

    Jul 1, 2008, 11:37 AM
    Can you help with how to wire up a air handle and condensing unit
    jimmy jones's Avatar
    jimmy jones Posts: 3, Reputation: 1
    New Member
     
    #2

    Jul 1, 2008, 11:46 AM
    I want to wire up my air handler and condesing unit so what do I look for and how is it done?
    Missouri Bound's Avatar
    Missouri Bound Posts: 1,532, Reputation: 94
    Ultra Member
     
    #3

    Jul 1, 2008, 07:57 PM
    JImmy... you need to start your own thread... that is, ask your question by itself... not tag onto this one.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #4

    Jul 1, 2008, 08:39 PM
    <moved jimmy's thread to his own>
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #5

    Jul 1, 2008, 08:46 PM
    Jimmy:

    In general the t-stat wires terminate in the furnace.

    Usually two t-stat wires run from the furnace to the condenser for single stage non heat-pump systems.

    In general, you run a LV cable from the t-stat to the furnace/air handler and an LV cable from the furnace/air handler to the condenser.

    Now connect the dots.

    Yes, there are exceptions.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I wire up my new AC condenser fan motor? [ 7 Answers ]

My new AC condenser fan motor has an extra wire. What do I do with it? AC is a 1996 SEER 12 Rheem. New motor is an A.O. Smith 1/8 HP 208 RPM 208-230 volt. Old motor has 3 wires, black, brown, and orange. New motor has 4. Black, brown, orange, and brown with a white stripe. Does anybody...

A/c thermostat wiring air handler and condenser [ 1 Answers ]

The air handler tells the condenser what to do,how do the wires go? From the t-stat yellow,red,green,white,blue! From the condenser,red and white?in the air handler red,white,green,blue,orange,brownand yellow what goes where and how do they connect

Air handler ,condenser ,mismatch [ 2 Answers ]

I have a 3 year old Goodman 2 ton heat pump.The inside air handler is ten years old and leaking at the a coil. I want to install a Nordyne 2 ton 13 sear air handler in place of the leaking air handler.This new nordyne air handler has a factory installed txv,which is what I think that I would like...

New A/C Condenser - What wire gauge for supply? [ 1 Answers ]

Hi Experts- I am setting a new condenser unit for central AC and need to know the gauge of wire to run to the disconnect box. From the Manufacturer of the condenser: 13 SEER unit (higher efficiency) Minimum Ampacity: 14.5 25 Amp Breaker LRA 68

How to wire a heat pump & varialble air handler [ 2 Answers ]

Please help how to wire a Goodman 13seer 1.5 ton heat pump and 2.5 ton variable speed air handler to a EWC BMplus 3000 Zoning control system. Thanks, Alo:confused:


View more questions Search