Ask Experts Questions for FREE Help !
Ask
    denkasdorf's Avatar
    denkasdorf Posts: 2, Reputation: 1
    New Member
     
    #1

    Sep 30, 2008, 06:57 PM
    No cold water in bathtub
    Hi there,
    I am having a problem with my bathtub on my second floor of a house I just moved into.
    I don't have any water coming out of the cold water valve. The hot works fine and the toilet and sink both work fine for both got and cold.
    Is there a problem with the cartridge? There doesn't appear to be a separate shut off for the bathtub?
    Any help would be greatly appreciated.
    truck 41's Avatar
    truck 41 Posts: 221, Reputation: 21
    Full Member
     
    #2

    Sep 30, 2008, 07:20 PM
    Hello den. If the valve is a single handle then its probobly a pressure balancing valve, its probably sticking if it hasn't been used in a while. Either way you will need to shut the main water valve to the house off to take out and clean the cartridge. While you have the cartridge out of the valve have someone help you give a shot of water by turning on and off the main valve to check that there isn't any debre on the cold side supplying the valve. If you get a good flow of water through the valve then put cartrigde back on valve and try again. Let us know how it goes good luck----zeke----
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
     
    #3

    Sep 30, 2008, 08:09 PM

    Truck41 said it...

    In addition: Tub faucets have only rarely dedicated shut off valves. Some faucets have them installed on the rough body - but only in commercial applications and in very few residential situations.
    denkasdorf's Avatar
    denkasdorf Posts: 2, Reputation: 1
    New Member
     
    #4

    Sep 30, 2008, 09:21 PM

    Thanks. I did check the cartridge and itlooked OK. I will try to flush it with a quik burst and see what happens. I did talk to the previous owners and they say they hadn't used it in a while. Any need to replace the cartridge?
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
     
    #5

    Sep 30, 2008, 10:43 PM

    What brand andmodel is you bath tub faucet?
    Thanks.

    John

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

No pressure to cold water in bathtub [ 5 Answers ]

Hi! I had a Moen Faucet connected in my wife's tub about a year ago. It's been working great but the last three weeks or so It seems the cold water pressure is dropping dramatically. Hot water runs fine. This is the only faucet in the house that has this problem. I've already cleaned the aerator...

Cold Water Pressure Low in Bathtub only [ 5 Answers ]

We have a guest bathroom (used rarely), and the cold water pressure in the bath/shower is almost non-existant. The sink next to it and the toilet seem to have no problems. I read in other threads that flushing it will likely work, but I don't know how to do that. The house was built in 1983. ...

No cold water in bathtub [ 1 Answers ]

Up until 10 days ago, my bath/shower combination had cold water coming out of the spout. I have a single lever on/off switch, and in the cold water position there is almost no pressure, and no cold water- the water is luke warm. The fixtures and plumbing are about 20 years old. My husband did...

Little to no cold water in bathtub faucet [ 1 Answers ]

Can you please tell me if I need to have the faucet replaced or is there some type of adjustment that can be made to fix my problem. I have no problem with hot water it comes out full force.

Low water pressure in bathtub/shower hot or cold [ 7 Answers ]

My shower/bathtub has no water pressure. It does not matter if you turn the cold or the hot water on. The rest of the house is not having any problems with water pressure just this particular bathtub/shower. I tried removing the water spout to see if anything was stopping it up, but it won't...


View more questions Search