Ask Experts Questions for FREE Help !
Ask
Page 2 of 2 « First < 2
    Matt E's Avatar
    Matt E Posts: 19, Reputation: 1
    New Member
    		  
    #21

    Sep 25, 2008, 08:58 AM
    Nope, It's for a jointer and needs to sit inside the base cabinet
Not your question? Ask your question View similar questions
 
Page 2 of 2 « First < 2

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacement condenser fan motor wires are too short - now what? [ 2 Answers ]

The wires are about 10 inches too short. In normal wiring one would make a junction box and wire up extensions, but there is no place for a junction box inside the unit, of course. The original fan motor also used a flexible metal conduit, although the new fan wires appear to be overinsulated for...

Old AC condenser fan motor - which wires are which? [ 5 Answers ]

I have a Climatrol unit with an Emerson condenser motor that is shot. I bought an Emerson Rescue motor to replace it from the local AC supply store. The wiring diagram was stored in the AC unit, and it is no longer readable. The three disconnected motor wires from the old unit are yellow,...

Pink pill labeled 'Watson 502' [ 2 Answers ]

What is this pill?

1.5 harness need to run what wires for 1.6 motor [ 1 Answers ]

I'm having probs because I had the d15 motor on my honda civic and now I got a d16a6 motor but I don't havethe harness to be able to run the mpfi I have the dizzy but I don't know what wires to run to activate this with the stock 1.5 harness please help... thanx

3 wires + 2 wires  POOL MOTOR [ 2 Answers ]

I need help connecting a motor for my pool. The motor has 3 wires coming out of it. 1 white, 1 black, 1 black with a white stripe. A continuity test on the 2 blacks says they are wired together somewhere. I have a power cable coming out of the ground. 1 white + 1 black cables inside. ...

View more questions Search