Ask Experts Questions for FREE Help !
Ask
    pinejb's Avatar
    pinejb Posts: 2, Reputation: 1
    New Member
     
    #1

    Sep 7, 2008, 01:40 PM
    Dryer Circuit Backfeeding is Dangerous
    I was told that backfeeding my electric panel through my dryer circuit with a generator could burn the house down because it has no neutral wire. Why is there no neutral wire and why wouldn't it be just as unsafe when using the dryer circuit normally. Is there a way to make it safe?
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #2

    Sep 7, 2008, 02:13 PM
    It is extremely unsafe to do this. The reason is NOT what you wrote. In fact who ever told you that has no clue. A dryer does have a neutral. Older 3-wire dryer circuits had no ground.

    DO NOT even suggest ILLEGALLY backfeeding your service through a dryer receptacle.

    We have had several threads on this lately.
    Here:
    https://www.askmehelpdesk.com/electr...el-257455.html
    https://www.askmehelpdesk.com/electr...ng-257368.html
    https://www.askmehelpdesk.com/electr...or-257347.html
    https://www.askmehelpdesk.com/electr...or-256984.html
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #3

    Sep 7, 2008, 05:50 PM
    Because the guy working on the supposedly dead utility lines, turns your 240/120 V into 9000 volts and that a bit lethal. A transformer doesn't care where the input is. Thus in one case 9000V becomes 240/120 and in the other case 240/120 becomes 9000 V.

    Bet if you put 9000 V on the power line, the utility company will find you and prosecute and likely turn off your electricity. If the guy ends up dead, hope your insurance is paid up.

    Interlocks and/or transfer switches are mandatory to protect the utility worker's family from collecting on your homeowner's policy and you to continue to be provided with electricity.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #4

    Sep 7, 2008, 06:51 PM
    Pine, besides what KISS has already stated, the details are in those four threads I linked to.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #5

    Sep 11, 2008, 02:16 PM
    Well pine, I make it a strong point to never reply to e-mails that I get from message board contacts. That is the reason for the link in my sig line. In this case I'll make an exception. Considering you chose not to receive e-mails or PM's I'll post it here.

    Your "engineer" friend steered you wrong.

    All I can say is check this web site. I think you got some erroneous information.

    FPL: Using Portable Generators Safely

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Backfeeding your House panel [ 6 Answers ]

OK, before anyone smacks me, Let me say that I'll use an interlock (two in my case). But here's my question and why a transfer switch doesn't seem to work for me. All the houses in our area have 400A services. They split it at the meter base and run feeds to two 200A panels mounted right...

Short circuit dryer [ 1 Answers ]

My dryer burn the outlet I could be the dryer or the outlet the problem?

HE3 Dryer Tripping Circuit [ 1 Answers ]

I have a 3 year old HE3 Kenmore Elite Dryer-Gas. When I attempt to start a cycle it throws the circuit breaker, sometimes immediately other times after a few minutes. If I let it sit for a couple of minutes it will run for a "short" time(pun not intended). I Have moved the electrical source to...

Changing circuit breaker for dryer [ 2 Answers ]

I have built a new laundry room in our basement and will be moving the appliances down shortly from the main floor room. I put in a new dryer electrical outlet and ran the appropriate wire to the circuit panel, but was wondering how difficult is it to now remove the wires from the current dryer...

Backfeeding? [ 6 Answers ]

I have a problem with the electrical wiring in the house I bought.. or several problems. The home inspector pointed out to me before I bought the house that there were 4 -110V circuits in the mail electrical panel that had been doubled up on the breaker and needed their own breaker. Seemed like a...


View more questions Search