Ask Experts Questions for FREE Help !
Ask
    rjmatteson's Avatar
    rjmatteson Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 30, 2008, 05:51 PM
    24volt control for trane a/c
    I just moved into a house (renting) and noticed the 24volt wiring for the trane a/c is not wired up. Would anyone know the correct terminals to connect the wires, red, white and green? I am assuming the red may go to the Y terminal and the white to the O, is green the ground? Or do I have that all backwards?
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Aug 30, 2008, 06:06 PM
    Yes,, you have it all backwards,, we need to no the model numbers of the h/cooling system,the name on numbers off the tstat,, but if there is a chance of you making a mistake and causing even more damage,I believe I would let the landlord get it taken care of, its his responsibility,, and his expense if you was to blow something up
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #3

    Aug 30, 2008, 09:06 PM
    I had the same question about a ford tempo earlier and did not get a reply.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trane control board fuse blowing [ 6 Answers ]

Help! A/C unit went out last night. Opened inside unit up (Trane XE80) and pulled the 5 amp blade fuse on the control board and saw that it had blown. Replaced the 5 amp fuse, closed the panel, and the blower started. When I went to turn on the A/C, the 5 amp fuse blew again (and again). ...

Diagnosis of control board in Trane unit [ 10 Answers ]

Hi there... This is my first question and I would appreciate your expert help: The circuit breaker for my Trane central air unit tripped and upon further investigation, I found some sort of short circuit behind the Integrated Furnace control board CNT 2789. I saw a big spark behind the board...

Trane XL1200 Control [ 4 Answers ]

My Trane XL1200 continually shuts down with an error code that says "Replace Control." I jumpered around the thermostat to eliminate that and problem prevails. Does Trane mean replace the control board? I can't find a CNT1669 anywhere if this is the problem.

Trane 803 thermostat with Dehumidity Control [ 2 Answers ]

One simple question. If the dehumidity level is set for 50%, shouldn't the humidity remain at that level. It moves up and down from 50% - 55%. I understood that was the purpose of this control. To control the humidity at a constant percentage. Have I misunderstood?

Trane XL 16i, humidity control [ 5 Answers ]

We recently purchased a Trane 16XLi with a variable speed air handler. According to their ads, the unit has the ability to remove up to 24 gals. Of moisture per day. With the temp. set at 75 degrees, the humidity is running at a minimum of 55% at night and 57%-61% during the day. I've read that...

View more questions Search