Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
What is the best cpvc glue to use,in cold temperature?
[ 1 Answers ]
What is the best cpvc glue to use?
Shower water temperature
[ 1 Answers ]
The heating system I have is a one year old mega flow. I have a shower in our en-suite with a victorian mixer valve (again one year old), but what ever temperature you set it at bears no resemblance to the water temperature coming out. Most times it is on the maxium "hot" setting you can get, and...
Shower temperature
[ 1 Answers ]
I had poor cold water pressure in the shower. Full pressure everywhere else. Removed valve bodies, saw broken and dried rubber gaskets. So, I replaced both hot & cold American Standard 2 handle valve bodies. New valve seats. I proved water pressure OK, I think, by means of water squirting...
New mains shower, reasonably new Combi-boiler, but hot-cold-hot-cold-hot-cold shower!
[ 4 Answers ]
I've recently had a new bathroom put in, with a mains shower (used to be electric). But now my shower keeps running hot-cold-hot-cold every minute or so. My bath tap and sink tap in the bathroom are running fine, it's just the shower. I was told this shouldn't happen as I have a combi-boiler but...
Shower temperature change
[ 3 Answers ]
We are about to build a new house on a slab. Is there any way to minimize the temperature change in a shower, as when someone turns on another faucet, flushes the toilet, etc. Maybe pipe circuitry, or sizes? Thanks. View more questions Search
|