Ask Experts Questions for FREE Help !
Ask
    OneMuddyPaw's Avatar
    OneMuddyPaw Posts: 2, Reputation: 1
    New Member
     
    #1

    Aug 19, 2008, 04:49 AM
    Is this plumber's putty
    I am a new, first time homeowner so I'm sorry if this is a silly question. I've purchased a new manufactured home that was installed over a year ago. Both the basket strainers in the kitchen sink seem to have this gooey putty oozing out the sides, and it is now being smeared all over my sink. I can scrape away gobs of it with my finger. Is this normal? If this is plumber's putty, shouldn't it get hard?

    I am worried that my sink is not sealed properly and/or this goo can hurt my family. I wash my kids bottles in that sink. I'm having this same issue with both bathroom sinks and with the shower drain.

    Thanks for any help,
    Chrissy
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #2

    Aug 19, 2008, 04:55 AM
    Sounds like puumbers putty to me, sort of like Play Doe. Plumbers putty remains soft for a long time. Shouldn't be oozing out unless the nut holding the sink baskets were not tightened enough.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #3

    Aug 19, 2008, 05:03 AM
    Sounds like the installer made the rope of putty too thick and now it's squeezing out from under the drain lips. This may be a annoyance but it's harmless.
    Your only concern is that as the putty works out the retaining nut tension gets weaker under the drain,(see image). Go under the sink and retighten the nut. There will be more putty squeeze out but As you tighten it more will be squeezed out until the seal's permanent. Just part of breaking in a new home. By the way! Good luck in you new place! Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Does tub spout need rear flange or putty? [ 2 Answers ]

I bought a universal tub spout that doesn't have a rear flang like my original. Do I need to make a modification using putty or something to protect from water getting down inside the wall. The new spout has a drain hole close to the wall and water does leak out.

How to guide a plumber's snake in the direction desired? [ 6 Answers ]

So, we have a clogged drain under the floor of the basement . We know this because we noticed recently that when the kitchen sink upstairs or the washing machine downstairs are used, the downstairs laundry sink fills up with water identifiable as coming from the sink or the washer. If we let it...

Getting putty off pipe threads [ 2 Answers ]

Hi all. Does anyone know of an easy way to get old plumbers putty off/out of pipe threads? I need to remove the locknut on a bathroom sink drainpipe, and the threads on the pipe are full of old, dry putty |:( Thanks


View more questions Search