Ask Experts Questions for FREE Help !
Ask
    jrumstead's Avatar
    jrumstead Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jul 21, 2008, 10:11 AM
    Backsplash tile
    I'm going to be adding backsplash tile. I will be using "pencils" as the first course from the countertop up. Can I just silicone the bottom of the "pencils" to the counter top to prevent water from going under them or do I still have to grout them to the CT? Please advise.

    Thanks,

    John
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Jul 22, 2008, 07:56 AM
    I am not sure what you mean by "pencils" but the bottom of a backsplash is caulked not grouted. This allows for a very slight flex joint between the two surfaces.
    jrumstead's Avatar
    jrumstead Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Jul 22, 2008, 09:17 AM
    Quote Originally Posted by ballengerb1
    I am not sure what you mean by "pencils" but the bottom of a backsplash is caulked not grouted. This allows for a very slight flex joint between the two surfaces.
    Pencils are a border tile that are either6", 9" or 12" long and only approx. 3/4" high. Is the caulking hidden under the tile pencil or exposed in view? If exposed doesn't it have to match the color of the grout? I'm thinking I lay a bead of caulking and place the tile pencils on top with no visible evedence that there is any caulking under the tile, correct?
    kidolph's Avatar
    kidolph Posts: 90, Reputation: 12
    Junior Member
    		  
    #4

    Jul 22, 2008, 09:35 AM
    The best way to "caulk" this is to use 100% silicone. Lay a bead on the counter top and squeeze it out by pushing tile down to counter. Allow squeeze out to cure for 48 hours and cut down parallel with tile with point against counter. Peel cured bead off counter. This will leave a minimal amount of silicone showing and not allow the feathered edges of a "cove" installation to lift when cleaning. Water getting under the edges of a silicone cove is what makes it fail. Match color to tile or counter or use a translucent white. Translucent White picks up the colors around it and blends them.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Tiling over Formica Backsplash [ 5 Answers ]

I have a backsplash that is made of a sheet of formica. I want to tile my backsplash, but can't remove the formica and don't want to add a 1/4 inch thick layer of hardibacker. Can I rough up the formica with 60 grit sandpaper (or rougher) and then apply mastic and tile? Will it hold?

Corian backsplash [ 3 Answers ]

I would like to know what tool I should use to cut a corian backsplash. I am replacing the backsplash with ceramic tile ,but I need to make a cut in it at the serving counter backsplash which I will be leaving. Don't know what type of tool to use so I don't damage the corian countertop

Tiling kitchen backsplash [ 2 Answers ]

Hello. I am planning on putting in a tile backsplash in my kitchen, behind sink and stove, along the wall. Pretty standard, I suppose. Can I put the tile right onto the drywall, or do I need some kind of backer board to adhere it to? Thank you.

Tiling formica backsplash [ 3 Answers ]

What modifications do I need to make to install ceramic tile on a formica backsplash? Can I simply "rough-up" the formica with coarse sandpaper? OR Is installing cement board onto the formica the best approach? OR Is there another method better or the only way? Thanks

Tiling Backsplash that now has formica [ 3 Answers ]

Must the formica that now covers my backsplash in my kitchen be removed before installing a new tile backsplash? CAn the tile be adhered directly to the formica? If so what needs to be done to it and what is the best adhesive to use?

View more questions Search